Y-Connector

UL325 recognized device that allows for the connection of two independent 2-wire FRABA OPTOEYEs into the monitored input of a door operator board. If both connected photoeyes do not sense an obstruction, the operator receives a valid dynamic signal. If either of the photoeyes sense an obstruction, it will send an obstructed signal to the operator.

• Compatible only with NEMA 4X Photoeyes (OPAKPEN4GX.S sold separately)

• Monitored safety sensors must be on the operator manufacturers UL 325 Listing

• When using two sets of monitored photocells, the minimum vertical separation is 45 inches.

• Instruction Sheet

• Specification Sheet